overhead girder crane load

• The design of a gantry crane girder, therefore, involves the selection of a suitable and workable steel model and section to satisfy the machine (crane) requirements, loading, equipment, etc without leading to any structural or service failure. Normally, for medium-duty (say 25 to 30 t capacity) cranes, standard universal rolled I-beams are used.

• Crane Girder Design

  Mar 01, 2018 · Crane Girder Design Crane Girder Details Proper detailing is the key to good fatigue performance The vast majority of crane girder performance issues occur at the crane girder to column connection. 3 4 Column or Bracket Support • Do not use framed or clip angle type connections. • Extend bearing stiffeners the full height of the girder

• The ABUS single girder wall travel- ling crane is designed for spans up to 12m and load capacities up to 5 tonnes. The ABUS single girder semi­ goliath craneis designed for spans up to 15m and Safe Working Loads up to 10 tonnes. ABUS cranes make light work of lifting.

• Overhead Cranes Single Girder EOT Crane Load capacity: up to 12.5 t SWL Span: up to 36 m Wide range of girder connection versions for optimum adaptation to individual applications Very high hook positions possible. Enquiry Now

• Jan 15, 2016 · Overhead crane Load testing The overhead crane should be positioned on a stanchion or column of the runway with the trolley or electric hoist placed adjacent to the end of truck at the beginning of the overhead crane load testing to measure the deflection of the crane main girders and the runway girders at center span.

• Generally when the rated load weight is more than 15 ton or the span is over 30m, double girder overhead crane is a preferred option. It has rigid structure, reliable and durable performance, which will enormously increase production for your business. It provides more effective lifting height as the hook can be pulled up between two girders.



• Introduction of Gantry Girder | Load on Gantry Gutter | Types

  With quick-acting electric overhead traveling (E.O.T) cranes, the stresses in the gantry girders are produced almost instantaneously, whereas with slow-moving hand-operated cranes, the bending stresses in the girder are induced gradually from zero up to their maximum values, as the cranes traverse the girder from the end towards the center.

• The rated load of the crane shall be plainly marked on each side of the crane, and if the crane has more than one hoisting unit, each hoist shall have its rated load marked on it or its load block and this marking shall be clearly legible from the ground or floor.

• Overhead Cranes Single Girder EOT Crane Load capacity: up to 12.5 t SWL Span: up to 36 m Wide range of girder connection versions for optimum adaptation to individual applications Very high hook positions possible. Enquiry Now

• Jan 15, 2016 · Overhead crane Load testing. The overhead crane should be positioned on a stanchion or column of the runway with the trolley or electric hoist placed adjacent to the end of truck at the beginning of the overhead crane load testing to measure the deflection of the crane main girders and the runway girders at center span.

• Dec 05, 2020 · The single girder travelling crane is our flexible crane for almost any application. Even in buildings with low ceilings effective material flow solutions can be achieved for loads of up to 16 t and spans of up to 39 m. Normally safety clearances below ceilings are not required for single girder cranes within this load range.

• Introduction of Gantry Girder | Load on Gantry Gutter | Types

  A vertical load acting over the gantry girder is the reaction from the crane girder and consists of the self-weight of the crane, self-weight of the crab, and the crane capacity (the maximum load that can be hoisted). To calculate the reaction the maximum wheel load is computed. It occurs when the crab is nearest to the gantry girder.

• A double girder overhead crane is a lifting solution designed to carry medium and heavy duty loads. By using two adjacently positioned beams, double girder cranes offer improved support for the goods being handled, allowing the movement of larger capacities.

• The overhead crane called the bridge crane, is the lifting equipment for hoisting materials over the workshop, warehouse and stockyard. The crane runs longitudinally along the rails on both sides of the elevated bridge, which can make full use of the space under the bridge to lift materials without obstacles by the ground equipment.

• ZKKE Double-Girder Overhead Travelling Cranes Up to 100 Tonnes. A solid investment in handling efficiency and performance with its exceptional load capacity and minimum deadweight. Be sure to check out this overhead crane! EKWK Wall-Mounted Travelling Cranes Up to 6.3 Tonnes. Our Demag overhead crane is the best for adjacent workplaces.

• We provide various types of overhead bridge crane equipment such as AQ-LD single girder overhead crane, AQ-HD European overhead crane, AQ-QD double girder overhead crane, AQ-LH hoist double girder overhead crane, AQ-NLH European hoist double girder crane, etc. and tailor the overall design and construction plan according to your specific

• Overhead Crane-Hook Overhead Crane,Ladle Overhead Crane,Grab

  Overhead crane (bridge crane/ EOT crane) mainly consists of single girder overhead crane and double girder overhead crane.Hook overhead crane,ladle overhead crane,grab bucket overhead crane,European overhead crane etc.,to satisfy your needs.

• SINGLE GIRDER OVERHEAD TRAVELLING CRANE The ABUS single girder travelling crane is our flexible crane for almost any application. Even in buildings with low ceilings effective material flow solutions can be achieved for loads of up to 16 t and spans of up to 39 m.

Weihua has been engaged in crane R&D and manufacturing,main product is overhead crane,electric hoist,winch,gantry crane,jib crane,port crane,container crane,KBK,foundry crane,explosion proof overhead crane,crane accessories.