overhead crane current collectors

  • Current collectors for overhead cranes for keeping electrical connection between the power lead (trolley wire) and the electrical equipment of the crabe device intended for …

  • Crane Current Collectors – International Cranes

    Double Girder Overhead Crane. Load Capacity 1-200 Tons Girder Type ISMB / Box Type Max Height 60-80 feet, 80-100 feet, 20-40 feet, 40-60 feet, 0-20 feet Hoist Travelling Speed >25 m/min, 10-15 m/min, 5-10 m/min, 20-25 m/min, 15-20 m/min, 0-5 m/min Material M.S. / Alloy Steel Power Source Electric, Mechanical. Read More.

  • The current collector for overhead crane are connected to high voltage and low voltage cables and comprise of auto switchgear, circuit breakers, protection equipment and motor magnet switch. The main purpose of these current collector for overhead crane is to control, distribute, break, as well as convert the power supply by entering the high voltage cable and then to the low voltage ones.

  • Carbon brush current collector for Overhead Crane can be single pole busbar collector, multi-pole busbar collector, seamless conductor rail collector, copperhead conductor rail collector, etc. Its performance, quality, material and the structural components of the material will directly affect the safe operation quality of the whole system equipment.

  • 2017/2/15 · Collectors on an overhead crane system are contacting devices for collecting current from the runway or bridge conductors. Collectors play an important role in providing electricity to the hoist and other components of the crane. As the crane is in motion over long distances a …

  • XVI Collectors are for pick-up wire conductor systems, mainly used on overhead crane bridges to collect current from the trolley wire conductor system to run the transverse movement or lifting motors of the crane. These collectors are suitable for all sizes of trolley wire up to and including 3/0 B & S. Features.

  • overhead crane current collectors
  • Current collectors – Nedcranes

    port cranes, overhead cranes & gantry cranes Current collectors NEDCRANES supplies current collectors, pantograph, insulators, open or closed rails and earthing brushes.

  • crane current collectors. Description: We manufacture various types of current collector like single hinged, double hinged ,dsl ,gravity type current collectors are used to tap power supply from down shop leads to the moving crane. These current collectors with cast iron shoes will slide on the top of the angle iron type DSL system.

  • For a single crane: Size the conductor bar to handle 100% of the current draw of the largest motor or group of motors, plus 50% of the combined current draw of the other motors on the vehicle. For multiple cranes or vehicles: Determine the current draw for each crane/vehicle, using the method

  • Double Girder Overhead Crane. Load Capacity 1-200 Tons Girder Type ISMB / Box Type Max Height 60-80 feet, 80-100 feet, 20-40 feet, 40-60 feet, 0-20 feet Hoist Travelling Speed >25 m/min, 10-15 m/min, 5-10 m/min, 20-25 m/min, 15-20 m/min, 0-5 m/min Material M.S. / Alloy Steel Power Source Electric, Mechanical. Read More.

  • Current collectors – Nedcranes

    port cranes, overhead cranes & gantry cranes Current collectors NEDCRANES supplies current collectors, pantograph, insulators, open or closed rails and earthing brushes.

  • Current collectors. The current collectors are made of re-inforced polyester fiberglass,for high strength and light weight. Spring loaded carbon brushes maintain uniform contact. Connecting cables and hinged or flexible towing arms included. Double Current collectors for transfer applications and higher amperage.

  • We are Manufacturer and Exporter of Crane current collector for DSL conductor shrouded bus bar. Current collector are available in different ampere capacity 20Amp, 100Amp, 125Amp, 250Amp & 400 Amp. We are also manufacturing Current Collector For angle type MS DC DSL bus bar in different Current capacity 250Amp, 500Amp, 800Amp & 1000Amp.

  • DAMAG — CURRENT COLLECTOR for OVERHEAD CRANE — 4/15/2,5W200 Part No: 87368444 RRP of $460.00 plus taxes We combine Postage

  • C.M.A.A. – Crane Manufacturers Association of America, Inc. (formerly EOCI—Electric Overhead Crane Institute). COLLECTORS – Contacting devices for collecting current from the runway or bridge conductors. The main line collec-tors are mounted on the

  • SYSTEMS IN MOTION – Spida

    Collectors The current collectors are made of re-enforced polyester fiberglass, for high strength and light weight. Spring loaded carbon brushes maintain uniform contact. 1m connecting cables included. Longer lengths available on request. With the followingused:

  • current collector for crane: 40A Max. Voltage: 690V housing material: PVC housing colour: green or orange standard length: 4 meters materail: Copper & PVC application: overhead crane

  • For a single crane: Size the conductor bar to handle 100% of the current draw of the largest motor or group of motors, plus 50% of the combined current draw of the other motors on the vehicle. For multiple cranes or vehicles: Determine the current draw for each crane/vehicle, using the method

  • Conductor bar systems for overhead cranes can be used on both indoor and outdoor cranes and are most typically installed on the crane’s runway systems or on monorail cranes. One of the main advantages of using a conductor bar system is that they can be used on runways with more than one bridge operating on them.

Weihua has been engaged in crane R&D and manufacturing,main product is overhead crane,electric hoist,winch,gantry crane,jib crane,port crane,container crane,KBK,foundry crane,explosion proof overhead crane,crane accessories.